Left Joy-Con Charging Rail Replacement 14 No'lu Adım Geçmişi

14. Adımdaki Değişiklikler

Düzenleyen: Peter Lam — 31 May 2021

Düzenleme onaylandı tarafından Peter Lam

	[* black] Place the the mid-frame over the motherboard.
	[* black] Using three golden 3mm Philips #000 screws, secure the mid-frame onto the motherboard.
-	[* icon_~~note~~] When placing the mid-frame onto the motherboard, the bumper button may come loose. To reattach the bumper button, first insert the spring on the bumper button into the groove located on the top left side of the Joy-Con, then insert the right side of the bumper button into the Joy-Con.
+	[* icon_reminder] When placing the mid-frame onto the motherboard, the bumper button may come loose. To reattach the bumper button, first insert the spring on the bumper button into the groove located on the top left side of the Joy-Con, then insert the right side of the bumper button into the Joy-Con.