Autosampler Battery and Node Enclosure Assembly (2021) 8 No'lu Adım Geçmişi

8. Adımdaki Değişiklikler

Düzenleyen: Gina Kittleson — 29 Oca 2022

Düzenleme onaylandı tarafından Gina Kittleson

	[title] Feed Wires Through the Node Box
-	[* red] Pull the battery connection wires that go to their respective amphenol connectors through the two lower ports.
+	[* red] Pull the battery connection wires that go to the 2-pin amphenol battery box connectors through the middle port.
+	[* black] Pull the battery connection wires that go to the 2-pin amphenol autosampler batter connector through the bottom port.
	[* orange] Pull only the portion of the autosampler wires through the top port that has the signal wires (e.g. the bottle count and pulses).
	[* green] Twist the outer side of the port down until it fits snuggly around the wire.