Bu Adımdaki Değişiklikler
Düzenleyen: Glenda Lee —
Düzenleme onaylandı tarafından Glenda Lee
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] 1. Find a 13 (metric) wrench or socket wrench | |
| - | [* black] 3. Slide the wheel off and check your axel for dirt, grease, or hair. Clean thoroughly |
| [* black] 4. Open your new set of wheels. It is important to note that CandiGirl skates will need CandiGirl wheels because most standard wheels are not made the same and have different sized axels, nuts, and bearings. | |
| [* black] 5. Check over the new wheels to make sure they don’t have any issues | |
| [* black] 6. Reverse the process you just when through to take them off. - Put wheel on axel - Tighten the nut | |
| [* black] 7. Tighten the nut all the way to the right. Once you have it on there tightly, loosen it a little to allows your wheels to roll smoothly and not rub. |