Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Robert Boyd

Düzenleme onaylandı tarafından Robert Boyd

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Disconnect the display cables
-[* black] Use the flat end of a spudger to disconnect the two display cable press connectors by lifting straight up.
+[* black] Use the flat end of a spudger to disconnect the two digitizer cable press connectors by lifting straight up.
+[* icon_caution] To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
+[* icon_reminder] During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues.