Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Robert Boyd

Düzenleme onaylandı tarafından Robert Boyd


Adım Satırları

[title] Disconnect the display cables
[* black] Use the flat end of a spudger to disconnect the two digitizer cables by lifting straight up on the press connectors.
[* icon_caution] To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.
-[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.