| + | [title] Removing Screws |
|---|
| + | [* blue] If present, use the spudger to remove the rubber screw caps over the 3 screws in the center of the backplate. |
|---|
| + | [* light_blue] Start by removing the center 3 screws, which are shorter than the 5 of the outer 10 screws. |
|---|
| + | [* green] Then, remove the outer screws, with exception of the bottom corner screws. Note: The bottom screws are the same length as the center 3 |
|---|
| + | [* orange] Finally, remove the two bottom corner screws. The one on the bottom right should lift the cover, making it easier to insert the opening pick in the next step. |
|---|