Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: David Schaeffer

Düzenleme onaylandı tarafından David Schaeffer

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Brakes
[* black] Locate the brakeboth of the brakes and 2 large bolts, and insert the 2 large bolts in the remaining 2 holes.four long screws
[* black] Place the brake withbehind the arrow up and the handle to the outside of the chair on the 2 long bolts, and hand tightenfront frame right above the nutscastor wheels
[* black] TurnThere is an arrow on each of the chair and repeat this process withbrakes, make sure that the second wheelarrow is pointing
[* black] Locate the brakeboth of the brakes and 2 large bolts, and insert the 2 large bolts in the remaining 2 holes.four long screws
[* black] Place the brake withbehind the arrow up and the handle to the outside of the chair on the 2 long bolts, and hand tightenfront frame right above the nutscastor wheels
[* black] TurnThere is an arrow on each of the chair and repeat this process withbrakes, make sure that the second wheelarrow is pointing
[* black] Using 10 mm box wrench and T wrench, tighten all 3 large nuts and bolts on either side
[* icon_note] If assembling multiple chairs, you can cut a T wrench and place it into a power drill to speed up the process, or use a standard 10mm socket wrench.

Resim 1

Eski Sürüm

Yeni Sürüm