Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: David Schaeffer

Düzenleme onaylandı tarafından David Schaeffer

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Brakes
[* black] Locate the both of the brakes and the four long screws
[* black] Place the brake behind the front frame right above the castor wheels
[* black] There is an arrowicon_note] The brake with the yellow nob goes on eachthe right side of the brakes, make sure thatchair, and the arrow is pointingbrake with the black nob goes on the left
[* black] Using 10 mm boxScrew both of the screws into the bottom two holes in the frame using a 10mm wrench to hold the nut and T wrench, tighten all 3 large nuts and bolts on either sidethe T-Wrench to fasten the screws
[* icon_note] If assembling multiple chairs, youYou can cut a T wrench and place it intouse a power drill instead of a T-Wrench to speed up the process, or use a standard 10mm socket wrench.
[* black] There is an arrowicon_note] The brake with the yellow nob goes on eachthe right side of the brakes, make sure thatchair, and the arrow is pointingbrake with the black nob goes on the left
[* black] Using 10 mm boxScrew both of the screws into the bottom two holes in the frame using a 10mm wrench to hold the nut and T wrench, tighten all 3 large nuts and bolts on either sidethe T-Wrench to fasten the screws
[* icon_note] If assembling multiple chairs, youYou can cut a T wrench and place it intouse a power drill instead of a T-Wrench to speed up the process, or use a standard 10mm socket wrench.