Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Andrew Blocher

Düzenleme onaylandı tarafından Andrew Blocher

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[title] Footrest
[* black] AttachPosition the extendable footrest bar to the front frame at the desired height
[* black] AttachPosition the extendable footrest bar to the front frame at the desired height
[* red] Make sure the two bolt holes on the footrest bar line up with two of the holes on the front frame
[* icon_note] Pick the suitable position for the footrest that will complement the recipient (the position may be changed later)
[* black] Using the 10mm wrench, secure the footrest bar to the front frame using the a flat-head bolt and nut pointing in towards the center of the wheelchair
[* black] Attach the footrest to the footrest bar with the bottom of the footrest pointing upwards
[* black] Match the footrest wedges up with the holes and attach the footrest to the front frame using 4 small bolts and tighten 4 small nuts onto the bolts using the 10mm wrench
[* icon_note] The heads of the bolts should fit perfectly through the footrest