2. Adımdaki Değişiklikler
Düzenleyen: Wayne Roberts —
Düzenleme onaylandı tarafından Wayne Roberts
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Remove All Existing Solder from the Previous Switch Insert |
|---|---|
| + | [* black] Insert your soldering iron tip inside the hole and use the pump from the other side to remove all of the solder. |
| + | [* black] Unfortunately, I didn't take pictures of this process, however, this is where the desoldering pump becomes a necessity. The new switches will need ample room to be inserted in the holes, so you'll have to make sure there is no remaining solder in them. |