Black and Decker Pivot Plus PD600 Circuit Board Replacement Adım Geçmişi

Bu Adımdaki Değişiklikler

Düzenleyen: Mason Garcia — 24 May 2013

Düzenleme onaylandı tarafından Mason Garcia

	[* black] Inspect the circuit board for any loose or burnt components.
	[* icon_note] You may need to desolder and/or replace loose or burnt components.
-	[* icon_caution] ~~Soldering irons~~ and ~~solder can be very hot and cause severe burns. It is recommended~~ to ~~wear safety glasses and a long sleeve shirt~~.
+	[* icon_caution] Do not over heat the solder and remove components slowly to not damage the board.