Bu Adımdaki Değişiklikler
Düzenleyen: Mason Garcia —
Düzenleme onaylandı tarafından Mason Garcia
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] If there are not any loose or burnt components, the circuit board might be shorting out due to bad or damaged solder joints. | |
| [* black] To fix this, desolder the circuit board and reapply the solder to make sure there is a good electrical and mechanical connection. | |
| - | [* icon_caution] Soldering irons and solder can be very hot and cause severe burns. It is recommended to wear safety glasses and a long sleeve shirt. |