Bu Adımdaki Değişiklikler
Düzenleyen: esigourney —
Düzenleme onaylandı tarafından esigourney
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] With the heated soldering iron tip, touch the point where the wire contacts the circuit board. |
|---|---|
| + | [* black] If the wire and the circuit board are not heated sufficiently, the solder will not stick correctly. |
| + | [* black] If the solder pad starts to melt or bubble, remove the soldering iron tip from the board and allow the board to cool. Then, reapply the heated soldering iron tip to the same location, but for only half as much time as before. |