Eşyalarını Tamir Et Topluluk Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg —

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Unscrew the Phillips screw securely holding in place the motherboard and the four 7.2mm Phillips screws screws(two for each) holding in place adjacently the two vibration motors.
-[* black] Lift the motherboard, vibration motors and analog module joysticks pads ,all in one connection, away from the shell and place them securely.
+[* red] Use the Phillips #0 screwdriver to remove five 7.2 mm screws from the motherboard.
+[* black] Lift the motherboard, vibration motors and analog module joysticks pads all in one connection, away from the shell.