10. Adımdaki Değişiklikler
Adım Satırları
| [title] Install the fingerprint sensor, part 2 | |
| [* black] Gently insert the top edges of the palmrest under the screen hinges, then lay it down onto the rest of the laptop. | |
| - | [* red] Carefully slide the touchpad ribbon cable back under the metal frame and latch it back to the motherboard. (I found it easiest to do with a spudger or blunt tweezers on plastic edges of the ribbon cable.) |
| + | [* red] Carefully slide the touchpad ribbon cable back under the metal frame and latch it back to the motherboard. (I found it easiest to do with a spudger or blunt [product|IF145-020|tweezers] on plastic edges of the ribbon cable.) |
| [* red] Your fingerprint sensor's ribbon cable should already be pre-bent to match grooves in the metal frame below it. Try to position in it that groove as you reattach the palmrest. | |
| [* black] Gently press down around the edges of the palmrest to snap it back into the body of the laptop. |