Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Disconnect the ribbon cable connecting the Stummer circuit to the main control board.
-[* orange] Remove the 8 Phillips #0 screws holding the strummer circuit to the body.
+[* red] Disconnect the ribbon cable connecting the strummer circuit board to the main control board.
+[* orange] Remove the eight Phillips #0 screws holding the strummer circuit board to the body.
[* yellow] Ensure that the switches have a solid clicking action.
[* icon_note] Debris can often block the switches from actuating.