Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Chris Green

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Removing the power supply
[* black] Disconnect the power connector from the logic board (this looks alot like a standard ATX connector, but I have yet to test the voltages)
[* black] There is a 4-Pin Cable connected to the front panel box, remove it.
[* black] Disconnect the internal fan cable.
[* red] The Fan Connector
-[* black] Than Route all of the cables up through the case to the level of the power supply
+[* black] Then Route all of the cables up through the case to the level of the power supply.