3. Adımdaki Değişiklikler
Düzenleyen: Artis Hardaway —
Düzenleme onaylandı tarafından Artis Hardaway
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] 4. Place the Allen bolt in the pulley and use the Allen wrench to screw it back into place. Also, place the washer on the screw before you place the bolt back in place. |
| + | [* black] 5. Next, place the nut on the bolt and use your hand to twist it until it stops and use the adjustable wrench to tighten it. Do not screw your nut on too tight. If the nut is too tight the pulley will not have a full range of motion and your equipment will seem stiff when you try and use it. |
| + | [* icon_caution] Do not screw your nut on too tight. If the nut is too tight the pulley will not have a full range of motion and your equipment will seem stiff when you try and use it. |
| + | [* black] 6. Lastly, test your new pulley and make sure everything is working correctly. Once everything is set-up take your old pulley and dispose of it by taking it to the appropriate waste disposal company. |