Eşyalarını Tamir Et Topluluk Mağaza

8. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi —

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] While holding down the corners of the device, repeatedly pull up on the display then ease it back down to weaken the adhesive.
-[* black] Once you've opened a small gap between the front panel and the rear case, insert the blade of a halberd spudger or the tip of an opening pick into the gap you've created.
- [* icon_caution] Don't insert the pick more than 2 mm. Going any farther could permanently damage the display assembly. If using a halberd spudger, slice with the shortest part of the blade.
+[* black] While holding down the corners of the device, repeatedly pull up on the screen, then ease it back down to weaken the adhesive.
+[* black] Once you've opened a small gap between the front panel and the rear case, insert the tip of an opening pick into the gap you've created.
+ [* icon_caution] Don't insert the pick more than 2 mm. Going any farther could permanently damage the display panel.