8. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] While holding down the corners of the device, repeatedly pull up on the screen, then ease it back down to weaken the adhesive. |
|---|---|
| - | [* black] Once you've opened a small gap between the front panel and the rear case, insert the tip of an opening pick into the gap you've created. |
| + | [* black] While holding down the corners of the iPad, repeatedly pull up on the screen, then ease it back down to weaken the adhesive. This will eventually create a small gap in the seam. |
| + | [* icon_note] If the edge cools down during the pulling process, reheat the edge with an iOpener before proceeding. |
| + | [* black] Once you've created a small gap, insert the tip of an opening pick into the gap. |
| [* icon_caution] Don't insert the pick more than 2 mm, or you risk permanently damaging the display panel. |