Eşyalarını Tamir Et Topluluk Mağaza

9. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi —

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Lay a hot iOpener along the bottom left corner of the iPad, spanning from the opening pick to the home button.
-[* black] After letting the adhesive soften, insert an opening pick or halberd spudger into the iPad next to the opening pick.
+[* black] After letting the adhesive soften, insert an opening pick or halberd spudger into the gap next to the Smart Connector.
[* icon_caution] Be careful not to insert the opening pick deeper than 2 mm.
-[* black] Slice the adhesive along the bottom left side of the iPad using the opening pick. If the slicing becomes difficult, reheat the edge and try again.
+[* black] Use an opening pick to slice the adhesive along the bottom left side of the iPad. If the slicing becomes difficult, reheat the edge and try again.