9. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Lay a hot iOpener along the bottom left corner of the iPad, spanning from the opening pick to the home button. | |
| [* black] After letting the adhesive soften, insert an opening pick or halberd spudger into the gap next to the Smart Connector. | |
| - | [* icon_caution] Be careful not to insert the opening pick |
| - | [* black] Use an opening pick to slice the adhesive along the bottom left side of the iPad. If the slicing becomes difficult, reheat the edge and try again. |
| + | [* icon_caution] Be careful not to insert the opening pick more than 2 mm. |
| + | [* black] Use an opening pick or halberd spudger to slice the adhesive along the bottom left side of the iPad. If the slicing becomes difficult, reheat the edge and try again. |