13. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften. | |
| - | [* black] Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step. |
| - | [* black] Slide the blade along the top edge of the iPad, stopping before reaching the front-facing camera. |
| + | [* black] Use an opening pick to slice through the top edge of the iPad, stopping before you reach the front-facing camera. |
| + | [* icon_note] The adhesive is thicker along the top. You'll need to slice 1/2" deep—about the thickness of the top bezel. |
| + | [* black] If the slicing becomes hard, reheat the edge and try again. |