15. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger. |
|---|---|
| - | [* black] Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick. |
| - | [* black] Continue to slide the blade of the halberd spudger to the upper right corner of the iPad. |
| + | [* black] Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften. |
| + | [* black] Insert an opening pick or a halberd spudger blade just past the front-facing camera. |
| + | [* black] Use the opening pick to slice through the upper right corner adhesive. |
| + | [* icon_note] You'll need to slice 1/2" deep—about the thickness of the top bezel. |
| + | [* black] If the slicing becomes hard, reheat the edge and try again. |