15. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften. | |
| [* black] Insert an opening pick or a halberd spudger blade just past the front-facing camera. | |
| - | [* black] Use the opening pick to slice through the upper right corner |
| + | [* black] Use the opening pick to slice through the adhesive in the upper right corner. |
| [* icon_note] You'll need to slice 1/2" deep—about the thickness of the top bezel. | |
| [* black] If the slicing becomes hard, reheat the edge and try again. |