iPad Pro 12.9" Display Assembly Replacement 23 No'lu Adım Geçmişi

23. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 17 Kas 2021

Düzenleme onaylandı tarafından Arthur Shi

-	[* black] ~~Return to step 5 of this guide and ensure~~ the ~~thick portions of adhesive are adequately separated from the display assembly. If they are, continue with this step. Otherwise, slice the adhesive to break it up until the display assembly is freed.~~
-	[* icon_note] The display cables in this iPad are ~~shorter than some users may be comfortable with~~. Read the following warnings before ~~proceeding~~:
-	[* icon_caution] *Do not pivot the ~~display~~ about the lower edge.* The display cables ~~do not~~ have enough slack to allow for this and will tear if you do not slide the ~~display~~ towards the front-facing camera as you lift.
-	[* icon_caution] The display cables will tear if you raise the ~~display~~ more than 80º.
-	[* black] Lift up the upper edge of the ~~display~~ and slide it towards the front-facing camera to access the ~~iPads~~ internal components.
+	[title] Disconnect the screen
+	[* icon_note] The display cables in this iPad are very short. Read the following warnings before you proceed:
+	[* icon_caution] *Do not pivot the screen about the lower edge.* The display cables don't have enough slack to allow for this and will tear if you do not slide the screen towards the front-facing camera as you lift.
+	[* icon_caution] The display cables will tear if you raise the screen more than 80º.
+	[* black] Lift up the upper edge of the screen and slide the entire screen towards the front-facing camera to access the iPad's internal components.