1. Adımdaki Değişiklikler
Düzenleyen: David Sullivan —
Düzenleme onaylandı tarafından David Sullivan
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] To start removing the motherboard you have to remove a total of 5 screws, they are all a PH #1 bit and length of 3/8ths in. |
|---|---|
| + | [* icon_note] It is recommended to push down firmly on the screws as to not strip them when removing them as they may not spin easily at first |
| + | [* black] There are three on the right of the fan and require some moderate force to remove the first time |
| + | [* black] There is two more on the left side of the fan and require a moderate amount of force to remove the first time |
| + | [* black] After removing the screws the two metal tabs on either side will be free, just make sure to not bend them or accidentally damage the wires while doing further dissasembly |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi