Eşyalarını Tamir Et Topluluk Mağaza

10. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi —

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Check the P-Trap for leaks.
-[* black] Turn the water valve on. Check the pipe for leaks by running the water for 30 seconds or more (Tip hot water is easier to identify).
-[* black] Use your hand to identify any water. If you do, identify which section is leaking and tighten the nut.
-[* black] If it continues to leak you may need to use threading tape. Which is shown in the next step.
+[* black] Turn the water valve back on to check the P-Trap for leaks.
+[* black] Run hot water for 30 seconds or more, and use your hand to feel for any leaking.
+[* black] If you do, identify which section is leaking and tighten the nut.
+[* black] If it continues to leak, you may need to use threading tape, which is shown in the next step.