Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: nolanhergert —

Düzenleme onaylandı tarafından nolanhergert

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] 3M WorkTunes Connect Teardown
-[* black] Remove muff body by rotating 90° and pushing the clips out by hand. The plastic stud is oval in shape and is indicated in green on the image.
+[* black] It is much easier to insert and remove the muff body clips by rotating them 90°. The plastic stud underneath is oval in shape and is indicated in green on the image.
[* black] Remove pad by inserting a large flathead screwdriver or butter knife lengthwise and then twisting. The underlying plastic should pop off.
[* black] Now it's free! But be careful to not twist or yank the cable.