7. Adımdaki Değişiklikler
Düzenleyen: Lucas C —
Düzenleme onaylandı tarafından Alex Diaz-Kokaisl
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove Screws From Circuit Board And Disconnect Joystick | |
| - | [* black] Now, you need to remove the 4 screws holding the circuit board to the controller. You are NOT going to remove it completely, just lift it high enough to remove the joystick. The joystick has a small ribbon (blue ribbon) as well, but it is easy to connect and disconnect. Flip the latch up to disconnect the joystick ribbon. |
| + | [* red] Now, you need to remove the 4 screws holding the circuit board to the controller. |
| + | [* blue] The joystick has a small ribbon (blue ribbon) as well, but it is easy to connect and disconnect. Flip the latch up to disconnect the joystick ribbon. |
| + | [* icon_note] You are NOT going to remove it completely, just lift it high enough to remove the joystick. |