4. Adımdaki Değişiklikler
Düzenleyen: AJ Pereira —
Düzenleme onaylandı tarafından AJ Pereira
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Mounting the Rail | |
| - | [* red] Slide the rail until you have about |
| + | [* red] Slide the rail until you have about 2-3 mm between the rail and the end of the X axis extrusion. |
| [* yellow] Use both Linear rail Guide to center the rail to the Aluminum extrusion | |
| [* light_blue] Tighten the mounting screws as you go down. Making sure to slide down, slide the linear rail guide down as each screw is tightened. |