Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg —

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] Before removing the mother board, ensure that you do not wipe any thermal paste off of the mother board. This will cause the drone to over heat.
-[* red] Using the ESD Safe Blunt NoseTweezers, carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board.
+[* icon_caution] When removing the motherboard, don't wipe any thermal paste off of it. This will cause the drone to overheat.
+[* red] Using the ESD Safe Blunt NoseTweezers, carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board. Detach the connectors.