Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: iRobot —

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_caution] When removing the motherboard, don't wipe any thermal paste off of it. This will cause the drone to overheat.
-[* red] Using the ESD Safe Blunt NoseTweezers, carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board. Detach the connectors.
+[* red] Using the ESD Safe Blunt Nose[product|IF145-020|Tweezers], carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board. Detach the connectors.