Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Nathan Rosales

Düzenleme onaylandı tarafından Nathan Rosales

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the palm cover by simply sliding downwards. Remove the battery and the bluetooth usb.
-[* black] Using a flat head screwdriver pry the lighter purple tab and pull up on the purple. (don't pull hard there are wires connected)
+[* red] Using a flat head screwdriver 1.5mm to not pry but to adjust the connector. By doing this it will allow you to open the inside.(Caution raising, wires are still connected inside)
[* black] Remove both wire clips that are red and black using a flat head screwdriver.