6. Adımdaki Değişiklikler
Düzenleyen: Cooper Schroeder —
Düzenleme onaylandı tarafından Cooper Schroeder
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Flipping the drone over, use tweezers or the soldering kit to remove the power cables from the logic board. |
|---|---|
| + | [* black] Flipping the drone over, use a soldering kit to remove the power cables from the logic board. |
| + | [* icon_note] Make certain that the solder being removed is connected to the prop arm being replaced by tracing the wire connections. |
| [* black] If new to soldering a helpful guide can be found at [[Topic:Soldering]] |