Eşyalarını Tamir Et Topluluk Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Cooper Schroeder —

Düzenleme onaylandı tarafından Cooper Schroeder

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Flipping the drone over, use a soldering kit to remove the power cables from the logic board.
+[* red] Flipping the drone over, use a soldering kit to remove the power cables from the logic board.
[* icon_note] Make certain that the solder being removed is connected to the prop arm being replaced by tracing the wire connections.
-[* black] If new to soldering a helpful guide can be found at [[Topic:Soldering]]
+[* black] If new to soldering, a helpful guide can be found at [[Topic:Soldering]]