3. Adımdaki Değişiklikler
Düzenleyen: Sarah Westberg —
Düzenleme onaylandı tarafından Sarah Westberg
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Flip device over and apply force to the sides of the bottom panel and pull away from the drone to remove. |
|---|---|
| - | [* icon_note] The iFixit opening opening tool can also be used for panel removal. Simply slip the thin edge into the seam of the bottom panel and apply pressure. |
| - | [* icon_caution] Be carful not to put pressure on the gimble (camera mount) located at the front of the drone or the logic board of the drone exposed by the removal of the top panel. |
| + | [* black] Flip the device over and use an opening tool to pry the bottom panel off. |
| + | [* icon_caution] Be carful not to put pressure on the gimbal (camera mount) located at the front of the drone or on the motherboard. |