2. Adımdaki Değişiklikler
Düzenleyen: Udo Baingo —
Düzenleme onaylandı tarafından Udo Baingo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove the back cover screws | |
| [* black] Use a Phillips driver to remove the eight screws securing the back cover: | |
| - | [* red] Four |
| + | [* red] Four coarse thread 9.5 mm-long screws |
| [* orange] Four fine thread 5.8 mm-long screws | |
| [* icon_note] Despite the standards, Phillips screwdrivers can vary in size and shape—two drivers labeled as the same size may fit differently in the same screw. Use the size that fits the snuggest into the screw head. | |
| [* icon_note] Throughout this repair, [product|IF145-491|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your Steam Deck. |