| | [* icon_note] ZIF stands for Zero Insertion Force; if you're experiencing any resistance whatsoever during disconnection, double-check that the locking flaps are flipped up. |
|---|
| | [* orange] To disconnect the two [guide|25629|display cable connectors|stepid=64973], gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable. |
|---|
| | [* orange] Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket. |
|---|