Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Jacob Matos —

Düzenleme onaylandı tarafından Jacob Matos

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] ***Before removing the mainboard, ensure that you do not wipe any thermal paste (blue color and waxy consistently.) off of the mainboard. This will cause the drone to over heat.***
+[* icon_caution] Try to avoid disturbing the blue thermal paste covering two of the large board components. If the paste is disturbed or splotchy in places it may need to be removed and reapplied. For more information refer to the [guide|744|How to Apply Thermal Paste guide].
[* black] Using ESD Safe Tweezers Blunt Nose, remove the 5 cables attached to the main board.