Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Jacob Matos

Düzenleme onaylandı tarafından Jacob Matos

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Pull the wire that was once attached to the mainboard and attaches to the camera through the main body.
-[* black] Use the tweezers to pull the 4 rubber camera holsters out of the body.
-[* black] Using your J000 screw driver, unscrew the two remaining screws connecting the camera to the body.