Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Edrick Tong

Düzenleme onaylandı tarafından Edrick Tong

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Accessing the battery compartment
+[* black] On the backside of the DSI, you'll notice a plastic panel with two screws off to the side. Unscrew both screws using a #00 Phillips head screwdriver or an appropriately sized screwdriver bit.
+[* black] Unscrew both screws using a #00 Phillips head screwdriver or an appropriately sized screwdriver bit.
+[* black] Lift the plastic panel up and away from the DSI. If the panel stays in place after unscrewing, hold the DSI upsidedown and gently tap the device. This should free the panel.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi