2. Adımdaki Değişiklikler
Düzenleyen: Tobias Isakeit —
Düzenleme onaylandı tarafından Tobias Isakeit
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Create a gap | |
| [* black] Secure a suction handle to the right edge of the back cover, as close to the edge as possible. | |
| - | [* icon_note] If the back cover is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed. |
| [* black] Lift the back cover with the suction handle to create a small gap between the back cover and the frame. | |
| [* icon_note] In case you have trouble creating a gap, apply more heat to further soften the adhesive. Follow the [guide|25705|iOpener|new_window=true] instructions to avoid overheating. | |
| [* black] Insert an opening pick into the gap you created. |