Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Sam Omiotek —

Düzenleme onaylandı tarafından Sam Omiotek

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Head strap removal information
-[* icon_note] The head strap can be removed without removing the face gasket bezel if you have the correct length driver. ***If you are using your iFixit T5 driver, skip this step and proceed with removing the face gasket bezel.***
- [* icon_note] Your T5 driver must have a shaft longer than 18 mm (0.7 in) and an overall length less than 140 mm (5.5 in).
-[* red] Insert your T5 Torx screwdriver into the hole on the face gasket bezel to remove the captive screw securing the left side of the head strap.
+[* icon_note] The head strap can be removed without removing the face gasket bezel if you have the correct length driver. ***If you are using your iFixit T6 driver, skip this step and proceed with removing the face gasket bezel.***
+ [* icon_note] Your T6 driver must have a shaft longer than 18 mm (0.7 in) and an overall length less than 140 mm (5.5 in).
+[* red] Insert your T6 Torx screwdriver into the hole on the face gasket bezel to remove the captive screw securing the left side of the head strap.
[* black] Skip to step 12.