7. Adımdaki Değişiklikler
Düzenleyen: AJ Pereira —
Düzenleme onaylandı tarafından AJ Pereira
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Y Carriage Plate install | |
| - | [* red] Belt mounting holes goes on the right side |
| + | [* red] Belt mounting holes goes on the right side of the priter |
| [* black] Left side screws | |
| [* icon_note] Some early kits are drilled and taped for M5 Screws. The M4x8 FHCS is substituted for a M5x10 FHCS and the M4x10 BHCS substituted for M5x10 BHCS. | |
| [* green] 2x M4x8 FHCS | |
| - | [* red] Belt mounting holes goes on the right side of the Carriage plate |
| [* icon_caution] Right screw stack order | |
| [* orange] M4x10 BHCS - M4 washer - M4 Large OD washer | |
| [* black] Tightened the left side screws first |