1. BLV Ender 3 V2 Disassembly 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: David Husolo — 9 Ağu 2022

Düzenleme onaylandı tarafından David Husolo

	[title] Extruder Disassembly
+	[* black] Disconnect the extruder stepper cable.
	[* red] Remove the 1x M3 socket head screw with a 3mm allen wrench.
	[* orange] Remove the 1x M3 button head screw with a 2mm allen wrench. Remove the extruder tensioner arm.
	[* yellow] Remove the 1x M3 button head screw with a 2mm allen wrench.
-	[* ~~black~~] Remove the 1x M3 countersunk screw with a 2mm allen wrench. Remove the extruder stepper and set aside.
+	[* green] Remove the 1x M3 countersunk screw with a 2mm allen wrench. Remove the extruder stepper and set aside.