4. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Bed Frame Setup | |
| - | [* black] Take |
| + | [* black] Take 2x Y-Axis Belt Lockers and Belt Locker caps. Using 4x M3x10 socket head cap screws partially attach the caps to the lockers. |
| [* icon_note] make sure the rounded end of the cap is towards the side where the belt goes. | |
| + | [* black] Secure the Belt Locker Assembly and 2x black spacers to the bed plate using 6x M3x14 socket head cap screws. |
| + | [* black] Note the position of the belt lockers and endstop bump stop. The side with the bump stop will go towards the rear of the printer. |