4. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [title] Bed Frame |
|---|---|
| + | [title] Bed Frame 1 |
| [* black] Take 2x Y-Axis Belt Lockers and Belt Locker caps. Using 4x M3x10 socket head cap screws partially attach the caps to the lockers. | |
| [* icon_note] Make sure the rounded end of the cap is towards the side where the belt goes. | |
| [* red] Secure the Belt Locker Assembly and 2x black spacers to the bed plate using 6x M3x14 socket head cap screws. | |
| [* black] Note the position of the belt lockers and endstop bump stop. The side with the bump stop will go towards the rear of the printer. |