2. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Quick Note |
|---|---|
| [* black] I figured this out after the first assembly but it's easier if you remove the Y 4040 extrusion off the frame and install the motherboard enclosure into the frame. | |
| [* black] It is a very tight fit especially with the bed still on the printer. | |
| [* black] 6x M3x8 countersunk screws and 6x T-nuts secure it to the inside of the frame. | |
| [* black] Secure the motherboard enclosure into the frame with 4x M5x10 button head screws on the front where you tapped the threads | |
| [* black] 2x M3x8 socket head screws and 2x T nuts secure it to the underside of the Y 4040 |