5. Adımdaki Değişiklikler
Düzenleyen: David Husolo —
Düzenleme onaylandı tarafından David Husolo
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Bed Frame 2 |
|---|---|
| [* black] Thread in 2x M3x6 brass standoffs into the bed plate. | |
| [* black] Secure the end stop bump stop to the brass standoffs with 2x M3x6 Socket head screws | |
| [* red] Take your bed spacer and secure the bed frame and bed spacer to the Y MGN sled with 4x M3x14 socket head screws. | |
| [* black] Note the position of the bed frame. The MGN carriage screws are on the left and the belt lockers are on the right of the MGN rail. | |
| [* black] If you removed it during disassembly reinstall the Y stepper motor and Y belt tensioner. | |
| [* black] Reinstall the Y belt | |
| [* black] Thread in 9x M3x10 standoffs into the bed frame and tighten them down. |